Installing a Replacement Battery

Follow the steps below if you need to replace a battery.

1)Press down on the handset battery case cover (use the finger

indention for a better grip) and slide the cover downward to remove.

2) Remove the existing battery and unplug the connector from the jack.

3) Plug the battery connector (red, white & black wires) into the jack inside the battery compartment. (The connector notches fit into the grooves of the jack only one way). Match the wire colors to the polarity label in the battery compartment, connect the battery and listen for a click to insure connection.

note

Use only the Uniden (BT-0001) rechargeable battery pack supplied with your cordless telephone.

•If you try to use the phone when the battery case cover is open, you will hear beep and see

Please close the battery cover on the

display. Close the battery cover tightly.

N o t e o n P o w e r S o u r c e s

w w w . u n i d e n . c o m

N o t e o n P o w e r S o u r c e s [ 6 6 ]

Page 67
Image 67
Uniden DMX 776 owner manual Installing a Replacement Battery