Storing Phone Numbers and Names
Memory Dialing allows you to dial a number using just a few key presses. Your cord- less telephone stores up to 10 names/numbers in the handset.
1)Press and hold mem until ¨Memory Store¨ is displayed.
2)Enter a number (0 - 9) or press 
or 
to select the memory location where you would like to store
the number.
3)Press select. The following screen appears, and a cursor flashes indicating that the display is ready for the name to be entered.
Memory Store
1
2
Store Name
• In memory dialing |
operation, you must |
press a key within 30 |
seconds or the phone |
will return to standby. |
If you return the |
handset to the base, |
the phone will return |
to standby also. |
• You have 30 seconds |
after pressing mem to |
enter the number you |
If this screen appears, the selected memory location is already stored. Then you must either edit the entry in this location, delete the entry in this location, or select
¨Go Back¨ to choose another location.
4)To enter a name (up to 14 characters), use the number keys.
Edit Memory 1
Delete Memory 1
Go Back
wish to store. |
Otherwise, an error |
tone will sound. |
• See the "Steps for Entering Names and Special Characters". (See pages
• Use #/ 
and */tone/ 
to move the cursor to the desired location.
• Use delete/ch to delete characters as needed.
• Press and hold delete/ch to delete all the characters.
• If a name is not required, go to step 5.
M E M O R Y D I A L I N G [ 21 ]
