![](/images/new-backgrounds/1141879/14187921x1.webp)
B. Install the battery pack
Charge the battery pack for at least
1)Press in on the battery cover release and slide the cover down until it comes off.
2)Connect the battery pack connector observing correct polarity (black and red wires) to the jack inside the battery compartment.
Do not exert any force on this connection. It could cause damage to the battery or to the handset. The plastic connectors will fit together in only one way.
Once you are certain that you have made a good connection, then insert the battery pack into the battery compartment. Do not pinch the wires.
3)Securely close the battery compartment cover by sliding it up until it snaps into place.
4)Place the handset in the base with the keypad facing forward.
Use only the Uniden battery
(See page 7.)
G E T T I N G S T A R T E D [ 9 ]
GETTING STARTED