1) When the phone is in standby mode, press and hold cid/menu. The following screen appears.
2) Press 4 or press 
three times to select ¨Dial¨.
3) Press select to toggle between ¨Tone¨ and ¨Pulse¨ for each setting.
4)Press end or return the handset to the base unit. The handset returns to standby mode.
•If you are not sure of your dialing system, set for tone dialing. Make a trial call. If the call connects, leave the setting as is. Otherwise set for pulse dialing.
•If your phone system requires pulse dialing and you need to send the DTMF tones for certain situations during a call, you may "switch over" to tone dialing. (Refer to "Tone Dialing Switch over" on page 19.)
Setting the Language
1) When the phone is in standby mode, Press and hold cid/menu. The following screen appears.
2) Press 5 or press 
four times to select ¨Language¨.
3)Press select to toggle between ¨Eng¨ and ¨Fr.¨ for each setting.
4)Press end or return the handset to the base unit. The handset returns to standby mode.
[ 16 ] G E T T I N G S T A R T E D
