Quick Reference Guide | Uniden EXI 386 Series manual

Step 1 Charging the Battery

TO INSTALL THE HANDSET BATTERY

1 Remove the cover.

Connect the battery pack

2 connector with the correct polarity.

3 Replace the cover.

TO PLUG INTO AC POWER

1Plug AC adapter cord into the base unit and then into a 120V AC outlet.

2Place the handset on the base.

Note: You must charge the battery continuously for 15 - 20 hours before using the phone.

Step 2 Connecting

Step 3 Setting Up the Caller ID/Language

CONNECT TO A PHONE LINE

When the handset battery pack is fully charged, after 15-20 hours of charging, plug the telephone cord into the base unit and then into a telephone wall jack.

Your phone is set for tone dialing. If your local network requires pulse dialing, please see “Choosing the dialing mode” on page 15.

Note: Three Caller ID options are available: AutoTalk,

Caller ID on Call Waiting (CIDCW), and Area Code.

TO CHANGE CALLER ID OPTIONS

1	Press and hold cid/menu.
2	Press	or	to move the pointer to an
	option.
3	Press select to change the option setting.
4	base.Press end and return the handset to the
TO CHOOSE THE LANGUAGE
1	Press and hold cid/menu.
2	Press	or	to move the pointer to
	Language.
3	Press select to select Eng (English) or
	Fr. (French).
4	base.Press end and return the handset to the

Q U I C K R E F E R E N C E G U I D E [ 3 ]

QUICK REFERENCE GUIDE

Image 5

Uniden EXI 386 Series manual Quick Reference Guide

Contents

Page Page Contents Welcome Features Quick Reference Guide Controls and Functions Status LED 9 to Read this First Checking the Package Contents Do the following steps Setting up the PhoneChoose the best location See Cleaning the battery charging contacts Low Battery Alert For assistance Modular Connect the base unit Standard wall plate mounting Mounting the Base Unit on a Wall Direct wall mounting Terminology Caller ID options Setting Menu Options Choosing the dialing mode Setting the Language Handset On Base Handset Off Base Making and Receiving Calls Handset ringer tone and volume Adjusting the Handset Ringer and Earpiece VolumeEarpiece volume Ringer Mute Traveling Out-of-Range Tone Dialing Switch overRedial Flash and Call Waiting HintsSelecting a Different Channel Memory Dialing Storing Phone Numbers and Names E M O R Y D I a L I N G Number of times key is pressed Steps for Entering Names and Special CharactersIf you make a mistake while entering a name E M O R Y D I a L I N G Display a Programmed Number Memory dialing from Standby ModeMaking Calls with Memory Dialing Chain Dialing Memory dialing from Talk Mode Press and hold mem until ¨Memory Store¨ is displayed Editing a Stored Name and/or Phone Number Uniden Corp John DOE Erasing a Stored Name and Phone Number Making Calls with the RocketDial RocketDialStoring and Editing the RocketDial Rocketdial Deleting the RocketDial Caller ID When the Telephone RingsYou must subscribe to Caller ID service to use this feature Viewing the Caller ID Message List When the pointer is at ¨No¨ When the pointer is at ¨Yes¨Deleting Information from the Caller ID List Deleting a Caller ID message Tone sounds and all stored Caller ID messages are deleted Dial edit Using the Caller ID ListCalling a party from the Caller ID list Storing Caller ID messages in Memory dialing Headset Installation Installing the BeltclipChanging the Digital Security Code To attach the beltclip Power Failure MaintenanceBattery replacement and handling Symptom Suggestion Troubleshooting Symptom Suggestion Case Action Liquid Damage AC Adapter Information Battery InformationGeneral Information Precautions Installation Considerations Terminal Equipment Radio Equipment K, L Index Memo At Uniden, we´ll take care of you