Selecting a Location | Uniden EXS 9660 instruction

INSTALLING AND ADJUSTING YOUR PHONE

SELECTING A LOCATION

Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some important guidelines you should consider:

●The location should be close to both a phone jack and a continuous power outlet. (A continuous power outlet is an AC

outlet which does not have a switch to interrupt its power.)

●Keep the base and handset away from sources of electrical noise such as motors and fluorescent lighting.

●Be sure there is sufficient space to rotate the base antenna fully vertical.

●The base can be placed on a desk, tabletop or mounted on a standard wall plate.

●You should charge your handset for 15-20 hours before connecting the phone line.

●If your second phone line has a separate jack, place your phone so you can access both jacks.

4

Image 6

Uniden EXS 9660 manual Selecting a Location

Contents

R E a D Spectrum Controls and Functions Contents Features Welcome Included in Your Package Selecting a Location DESK/TABLETOP Installation Wall Installation Standard wall plate mounting Direct wall mounting Page Page Installing the Handset Battery Pack Charging the Battery Pack Initial battery chargingCharging optional battery packs Low battery indicator Cleaning the Battery ContactsSetting the PULSE/TONE Switch To avoid Memory Effect Handset earpiece volume Adjusting the Volume ControlsHandset ringer volume Base ringer volume To remove the beltclip Installing the BeltclipTo attach the beltclip Pull back on the release tab. Lift the beltclip up Restore power to the base Place the handset on the base Headset InstallationTo reset the digital security code Automatic Digital Code Security Making and Receiving Calls Basic 2-line operation Answering a Call from the Base Making a Call from the Base Making a Call from the HandsetOff-Hook Dialing Using the Tone Feature Flash and Call WaitingOn-Hook Dialing To redial from the handset Using RedialPlacing a Call on Hold Press line 1, then press redial/p You can hear the party on line 1, but they cannot hear you Using the Mute FeatureUsing the page Feature Handset beeps for 60 seconds Following screen appears Line Operation Extension In Use WAY Conferencing Press int’com on the handset to answer Press page/int’com on the base Using Your EXS 9660 IntercomFrom the Base to the Handset Speak within 12 inches of the base microphone Answer at the base by pressing Transferring a CallFrom Handset to Base Call with the intercom On the base, press line 1 to talk Traveling OUT-OF-RANGE Del key deletes characters as the cursor moves left On the HandsetKeys to move right or left or to create a blank space Display is ready for a number to be entered On the Base To edit a number you have stored in the handset Use the and keys to move the cursor left and right Press del to remove an unwanted character From the Handset Erasing a Number from MemoryAfter erasing a number, you may add a new address to memory Press select Following screen appears From the Base Using Memory Dialing On-Hook Dialing from the HandsetPress line 1. The number dials Press line 1. The line 1 LED lights Off-Hook Dialing from the HandsetDialing from the Base Number dials Using Caller ID Setting up Caller ID optionsTurning AutoTalk and Caller ID/Call Waiting On or Off Press the select key to toggle between On and Off If you want to set CIDCW, useKeys to move the cursor Programming Your Area Code Press select Press to scan through Name/numbers Reviewing Caller ID name/numbersUse or to select line With the date, time, call count Select the name/number that you would like to dial Storing a Caller ID number in a memory location Press memory to store the selected message Deleting a Caller ID message Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call Waiting Quick Reference Chart General Base UnitHandset At Uniden, we’ll take care of you Thank YOU