Manuals / Uniden / Communications / Cordless Telephone

Uniden EXS 9660 manual Wall Installation, Standard wall plate mounting

Models: EXS 9660

1 49

Download 49 pages 3.44 Kb

Page 8

Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.

DO NOT use an outlet controlled by a wall switch.

6

WALL INSTALLATION

▼Standard wall plate mounting

This phone can be mounted on any standard telephone wall plate.

1. Snap the desktop/wall mount adapter into the bottom of the base as shown.

2. Plug the AC adapter into the base.

3. Place the AC adapter cord inside the molded wiring channel. Wrap the cord around the strain relief notch.

4. Plug the AC adapter into a standard

120V AC wall outlet.

5. Plug one end of the short telephone

cord into the TEL LINE 1/2 jack on the back of the base. Plug the other end into a standard telephone jack.

If your second line has a separate jack, plug the other cord into the base and wall jack.

Image 8

Uniden EXS 9660 manual Wall Installation, Standard wall plate mounting

Contents

R E a D Spectrum Controls and Functions Contents Features WelcomeIncluded in Your Package Selecting a Location DESK/TABLETOP Installation Wall Installation Standard wall plate mountingDirect wall mounting Page Page Installing the Handset Battery Pack Charging optional battery packs Charging the Battery PackInitial battery charging Cleaning the Battery Contacts Setting the PULSE/TONE SwitchLow battery indicator To avoid Memory EffectAdjusting the Volume Controls Handset ringer volumeHandset earpiece volume Base ringer volumeInstalling the Beltclip To attach the beltclipTo remove the beltclip Pull back on the release tab. Lift the beltclip upHeadset Installation To reset the digital security codeRestore power to the base Place the handset on the base Automatic Digital Code SecurityMaking and Receiving Calls Basic 2-line operationAnswering a Call from the Base Off-Hook Dialing Making a Call from the BaseMaking a Call from the Handset On-Hook Dialing Using the Tone FeatureFlash and Call Waiting Using Redial Placing a Call on HoldTo redial from the handset Press line 1, then press redial/pUsing the Mute Feature Using the page FeatureYou can hear the party on line 1, but they cannot hear you Handset beeps for 60 seconds Following screen appearsLine Operation Extension In UseWAY Conferencing Press int’com on the handset to answer Using Your EXS 9660 Intercom From the Base to the HandsetPress page/int’com on the base Speak within 12 inches of the base microphoneTransferring a Call From Handset to BaseAnswer at the base by pressing Call with the intercom On the base, press line 1 to talkTraveling OUT-OF-RANGE On the Handset Keys to move right or left or to create a blank spaceDel key deletes characters as the cursor moves left Display is ready for a number to be enteredOn the Base To edit a number you have stored in the handset Use the and keys to move the cursor left and rightPress del to remove an unwanted character Erasing a Number from Memory After erasing a number, you may add a new address to memoryFrom the Handset Press select Following screen appearsFrom the Base Press line 1. The number dials Using Memory DialingOn-Hook Dialing from the Handset Off-Hook Dialing from the Handset Dialing from the BasePress line 1. The line 1 LED lights Number dialsTurning AutoTalk and Caller ID/Call Waiting On or Off Using Caller IDSetting up Caller ID options If you want to set CIDCW, use Keys to move the cursorPress the select key to toggle between On and Off Programming Your Area CodeReviewing Caller ID name/numbers Use or to select linePress select Press to scan through Name/numbers With the date, time, call countSelect the name/number that you would like to dial Storing a Caller ID number in a memory location Press memory to store the selected messageDeleting a Caller ID message Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call Waiting Quick Reference Chart Handset GeneralBase Unit At Uniden, we’ll take care of you Thank YOU