Before using your phone, charge the Nickel- Cadmium battery pack for 15-20 hours.

Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.

Use only the Uniden AC adapter supplied with this phone. DO NOT use an outlet controlled by a wall switch.

DESK/TABLETOP INSTALLATION

1. Snap the desktop/wall mount adapter into the top of the base as shown.

2. Plug the AC adapter cord into the 10V DC input jack on the back of the base.

3. Wrap the AC adapter cord around the strain relief notch.

4.Plug the AC adapter into a standard 120V AC wall outlet.

5.Charge the battery (refer to CHARGING THE BATTERY PACK, page 11).

6.Plug one end of the long telephone cord into the TEL LINE 1/2 jack on the back of the base.

7.Plug the other end of the cord into the telephone jack on the wall.

8.Set the base on a desk or tabletop. Place the handset on the base with the

keypad either facing up or down. Raise the antenna to a vertical position.

5

Page 7
Image 7
Uniden EXS 9660 manual DESK/TABLETOP Installation