Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.
3) Set the base on a desk or tabletop, and place the handset in the base unit as shown.
4) Raise the antenna to a vertical position.
5) Make sure the status/voice mail LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts.
•Use only the supplied
•Connect the AC adapter to a continuous power supply.
•Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.
•After installing the battery pack in the handset, charge your handset at least
6) Connect the telephone line cord to the TEL LINE jack and to a telephone outlet once the handset is fully charged.
If your telephone outlet isn't |
|
modular type, contact your telephone |
|
company for assistance. | Modular |
|
[ 14 ] G E T T I N G S TA R T E D
