Step 1 Charging the Battery

INSTALL THE HANDSET BATTERY

Remove the cover.

Connect the battery pack connector with the correct polarity.

Replace the cover.

Step 2 Connecting

CONNECT TO A PHONE LINE

When the handset battery pack is fully charged, plug the telephone cord into the base unit and then into a telephone wall jack.

Your phone is set for tone dialing. If your local network requires pulse dialing, please see “Setting up the phone, Choose the dialing mode” in your owner’s manual.

TO SELECT CALLER ID OPTIONS

Press menu/mute.

Press + or -/ to move the pointer to “Caller ID Setup”, then

press select/chan.

Press + or -/ to move the pointer to an option, then press select/chan.

Press + or -/ to change the option setting.

Press select/chan and return the handset to the base.

Q U I C K R E F E R

PLUG INTO AC POWER

Step 3 Setting up the Caller ID Options/Language

 

Plug the AC adapter cord into the base unit and then to a 120V AC outlet.

Place the handset in the base.

 

Note: Three Caller ID options are available:

Note: You must charge the battery pack continuously

Auto Talk, Caller ID on Call Waiting (CIDCW)

and Area Code.

for 15-20 hours before using the phone.

TO CHOOSE THE LANGUAGE

Press menu/mute.

Press + or -/ to move the pointer to

Language”, then press select/chan.

Press + or -/ to change the option setting.

Press select/chan and return the handset to the base.

E N C E G U I D E

Q U I C K R E F E R E N C E G U I D E [ 5 ]

Page 7
Image 7
Uniden EXT 1480 manual I C K R E F E R