Distinctive Ringer Setup
“Distinctive Ringer” allows you to preset memory locations with a designated ring tone. When an incoming call is received and the Caller ID information matches the information in one of the memory locations, the Distinctive Ring that has been stored for that particular caller will sound.
If you have set multiple memory locations with distinctive rings, switching the setting to “Distinctive Off” will result in no distinctive ringing. All incoming calls will have a normal ring tone. Switching to “Distinctive On” will activate all programmed distinctive ring memory locations.
1) When the phone is in the standby mode, press menu/mute.
2) Press 
to move the pointer to “Distinct. Ring”, then press select/chan.
3) Press + or 
to choose “Distinctive On” or “Distinctive Off”.
4) Press select/chan and you will hear a confirmation tone.
Adjusting the Earpiece Volume
The handset earpiece volume settings (Volume Low, Volume Medium, Volume High, and
Volume Maximum) can only be adjusted during a call. Press + or 
to select
the volume setting. When you hang up, the phone keeps the last volume setting selected.
If you press + in maximum volume level or 
in lowest volume level, you will hear a beep.
See “Storing Phone Numbers, Names. Distinctive Rings, and Speed Dial” on page 30 for storing a Distinctive Ring in the Phonebook.
B A S I C S
