Terminology

Throughout this manual, terms such as Standby and Talk Mode are used. Below is the terminology explanation.

Standby Mode - The handset is not in use, is off the base, and talk/call wait has not been pressed. A dial tone is not present and the display is blank.

Talk Mode - The handset is not on the base and talk/call wait has been pressed enabling a dial tone. “Talk” appears on the display.

Mounting the Base Unit on a Wall

Setting the handset retainer clip for wall mounting

1) On the base unit, pull the handset retainer out of the slot. Rotate it clockwise 180 degrees.

2) Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the oval is down. The retainer holds the handset in place.

[ 16 ] G E T T I N G S TA R T E D

Page 18
Image 18
Uniden EXT 1480 manual Terminology, Mounting the Base Unit on a Wall, Setting the handset retainer clip for wall mounting