Uniden EXT 1480 manual Editing or Restoring Calling Features, Edit a Calling Feature

Editing or Restoring Calling Features

You may reprogram calling features in any of the other locations or restore the pre-programmed calling features at any time.

Edit a Calling Feature

1) When the phone is in the standby mode, press menu/mute.

2) Press + or -/ to move the pointer to “Network Service”, then press select/chan.

3) Press + or -/ or enter a number (1-0) to select

a feature, then press select/chan.

4)Edit the name by using phonebook/<<, cid/>>, and the number

keypad. If you enter a wrong character, move the cursor to the character by using phonebook/<< or cid/>>.

Press the delete/transfer key to delete the character, then enter the correct character.

Press and hold delete/transfer to delete all characters at once.

5)Press select/chan, “Change Svc No.” appears.

6)Edit the activation code by using phonebook/<<, cid/>>, and the number keypad. If you enter a wrong digit, delete the digit by following the same way as step 4.

7)Press select/chan. “Done!” appears. The phone displays the pre-programmed calling feature you have edited.

Restore a Calling Feature

You can restore a calling feature to its original pre-programmed state. Press delete/transfer when the desired pre-programmed calling feature is displayed, and follow the instructions below. If you have selected to restore the calling feature 2, the following display appears: Select “Yes” and press select/chan to restore the calling feature, “Done!” appears. The phone displays the original pre-programmed

calling feature.

A D V A N C E D C A L L I N G F E A T U R E S

A D VA N C E D C A L L I N G F E AT U R E S [ 45 ]