•You cannot make a call from the Caller ID list if your phone is connected to a private branch exchange (PBX).
•When a long distance call has been set, “1” appears in
the display.
•If a call comes in via a telephone system that does not offer Caller ID service, no information is stored.
Using the Caller ID Message List
Calling a party from the Caller ID list
From Standby mode
1)Press cid/>>. The summary screen appears. The screen shows the number of new messages and the total number of messages.
2)Use the number keypad 
to view the Caller ID message list.
3) Press talk/call wait. The displayed phone number dials automatically.
From Talk mode
1)Press talk/call wait.
2)Press cid/>>. The summary screen appears.
3)View the Caller ID message you want to dial.
4)Press select/chan. The displayed phone number will be dialed.
Long Distance calls and Area Code Setting/Cancellation
While the incoming Caller ID information is displayed, pressing */tone will place or remove the prefix “1” in the display to set the call for a long distance call, or pressing # will set or cancel an area code. (See page 20.)
Storing Caller ID messages in the Phonebook
Messages shown in the Caller ID list can be stored in the phonebook. Using the incoming call information (i.e., Caller ID list), the phone number of the party on
the Caller ID list can be stored in memory.
1) When the phone is in the standby mode, while the incoming Caller ID information is displayed, press phonebook/<<.
2) Press + or 
to select “Yes”. To cancel Storing, select “No”.
[ 40 ] C A L L E R I D
