Priority Scan
When a priority channel is selected and scan is activated, the radio will monitor the prioritised channel regularly for activity while scanning.
While scanning, if a signal is received on the priority channel the radio will stay on that channel as long as the signal is
present. Otherwise, priority scanning resumes after 3 seconds.
However, if scanning stops on a channel which is not a priority channel, the radio will continue on checking regularly
the priority channel for activity while monitoring the current active channel.
To select a priority channel:
1.Enter the selected Priority channel using the Numeric Keypad.
Example: Selecting CH20 as Priority Channel
-Press <D, (])
2.Then press the @ Key.
After pressing the @ Key, the unit setting changes to
the selected priority channel and displays the PRI indicator.
Note: Setting a Tone Squelched Channel as a Priority Channel is not possible. Any prioritised Channel when programmed to "Oviet" Mode will override the priority setting.
PriorityScanning is inactive in TSO Scan Mode.
To remove the Priority Channel setting
1.Manually or directly select the prioritised channel.
2.Momentarily press the @ Key. The PRI indicator disappears from the LCD display.
Page 17 |
|
