Operation
RECEIVE
1.Turn the radio ON. Rotate the ON/OFF Volume control clockwise until you hear the click. A channel number
should appear in the LCD Display.
UP DOWN
2.Press the 0 or 0 switch or use the Numeric Keypad to select the desired channel.
3.Press the monitor switch
4.Rotate the ON/OFF Volume control to adjust the speaker volume to a comfortable level.
5.Press the Monitor switch
Direct Channel Keying
Allows you to directly select a channel using the Numeric Keypad.
Example 1: Selecting CH5 directly
- Press <D then @ .
Example 2: Selecting CH25 directly
-Press <D, <D then @ .
Upon pressing the @ Key, the LCD display and the unit channel setting changes to CH25.
Automatically eliminates the unwanted "rushing" noise when the unit is turned ON.
-press the Monitor Switch to set the
Note: Tolisten to weak signal transmissions, switch OFF
the
level). .
Page 15 |
|
