Uniden UH-057 manual Select the lead-In Tone you want to use Example, To remove the lead-In Tone

To program:

1.Press the @l) Key for about 1.5 sec.

Two beeps will be heard and the lCD displays:

[ - -]

2.Press the @ Key. The PRI indicator appears on the lCD display and flashing.

, I I"	-	8:» ..
PAl
...I I ..
3. Select the lead-In Tone you want to use.
Example:
Selecting the Tone assigned to digit 1.
Press (D. The lCD displays:			-
, I I"		-I
PAI-
I	..

3. Pressthe@l) Key to complete the programming. Two beeps will be heard and the lCD returns to its previous status prior to accessing Programming Mode.

To remove the lead-In Tone:

1.Follow steps 1 and 2 of lead-In Tone Programming.

2.Press and hold @l) Key for about 1.5 sec until you hear the two beeps. the lCD will display "E" Tone but it will not be programmed to the memory.

Be careful not to press the @l) key twice.

Otherwise, "E" tone will be programmed as your lead-In Tone.

Note: Make sure that all members of your group will use the same Lead-In Tone. Else, you will lessen the probability of receiving and successfully decoding a se/call call while TSQ Scanning.

Page 33 UH-O57