Uniden UH015sx manual Lead-in Tone

UNIDEN Model uh015sx UHF CB Radio

Selcall ID

3.When finished, press MENU /ENTER to store. Three successive beeps are heard.

4.Press MENU /ENTER for 2 seconds to exit. The radio returns to normal operation.

-or-

Turn the Channel Selector to go to the next programmable parameter.

Lead-in Tone

The Lead-in Tone, when programmed, ‘rides’ on the Lead-in Delay.

Hence, when transmitting a Selcall ID, a continuous tone will be heard for the duration of the Lead-in Delay.

The main purpose of the Lead-in Tone is to increase the probability of contact between your unit and another radio when TSQ Scanning.

1.Press and hold MENU then turn power on.

Rotate the Channel Selector until is displayed.

Tone _ 1 is the factory default setting of the uh015sx for Lead-in Tone.

2. Press MENU /ENTER and Lead-in Tone Editing is possible.

Use the Channel Selector to change the Lead-in Tone value.

30