UNIDEN Model uh015sx UHF CB Radio
Operation
Group Scan (GS) Mode
The GS scan memory is empty at factory setting. Channels and frequencies must be memorized to GS scan memory for scan to work in GS mode (see p.13).
Allows you to monitor a Priority channel while scanning other channels in the GS memory. The Priority channel is the same as the Instant Priority Channel, see p.16.
To monitor the Priority channel during GS the priority setting in the menu must be on. Press MENU 2 times. The priority icon and setting will flash. Turn rotary knob to select on. Press and hold MENU /ENTER to confirm. The PRI icon appears.
If the priority setting is not turned on, then GS can be used in the same way as OS.
To switch to GS Mode, press and hold SCAN for 2 seconds. GS icon appears on the display.
GS Scanning checks the Instant Priority Channel for activity regularly.
If the Priority Channel becomes active the radio will stay on that channel for as long as the signal is present. If the received signal ceases, Priority Scanning continues after 3 seconds.
If scanning stops on a channel which is not a Priority Channel, uh015sx will continue monitoring the Priority
Channel for activity while listening to the active one.
MENU | SCAN | SRCH | MON | HOLD | POL |
ENTER | OS/GS | BAND/TSQ | SQL | DCS/CTCSS | MEM |
During Scan you may...
! Press HOLD to hold scan. Press HOLD again to resume scan.
!If scan stops on a frequency and you wish to continue then turn rotary channel selector.
!The direction of scan can be changed using the rotary channel selector. .
! | To remove an active channel from scan memory press and hold POL /MEM and |
| scan resumes. |
! | Press and hold SCAN /OS/GS for 2 seconds to switch between GS and OS modes. |
| To deactivate scan, press SCAN momentarily. |
!When Scan is deactivated the starting channel will be reinstated.
! If scan is deactivated while on hold the hold channel will be reinstated.
12
