UNIDEN Model uh015sx UHF CB Radio
Reciever Selcall ID
Programming Your Selcall ID.
To programme your own receiver Selcall ID.
1.Press and hold MENU then turn power on.
2.The initial display and status will appear on the screen (factory default is 00000).
3.When the MENU key is pressed while in this condition , the last digit will begin to flash.
4. Use | SCAN or POL | to select the digit position. The selected digit will flash. |
5.Rotate the Channel Selector to change the active digit value.
6.When finished, press MENU /ENTER to store . Three successive beeps are heard.
7.Press MENU /ENTER for 2 seconds to exit. The radio returns to normal operation.
Turn the Channel Selector to go to the next programmable parameter.
24
