![](/images/new-backgrounds/1313929/31392965x1.webp)
UNIDEN Model uh015sx UHF CB Radio
Alarm Mode
Alarm Mode
When a received code matches to your receiver Selcall ID and you selected the Call Alarm Auto Mode the Unit will:
a.Transmit an Acknowledge tone to the Caller.
b.Emit CALL Alarm for 10 seconds only.
c.Resume Quiet condition automatically after 20 seconds if the call is not answered.
d.The Unit will start decoding again when the 20 second period elapsed and the call remained unanswered.
Call Alarm Continue Mode
a.The Unit will transmit an Acknowledge Tone to the Caller.
b.Initially an alarm of four successive beeps is emitted for 20 seconds and then two successive beeps every four seconds continuously unless answered.
c.The Quiet Condition is never resumed.
d.The Unit continues to check if incoming codes have your Receiver Selcall ID even though the Quiet Condition is already opened.
When detected, it will send an acknowledge Tone to the caller and then resets the Call Alarm.
For both of the above mentioned modes, transmission by using the Press-
1. Press and hold | MENU then turn on the power. Rotate the Channel |
Selector until | is displayed. |
32