Setting Up a Group MMSI

You can program a group MMSI. A group MMSI is 9 digits in length.

1.Rotate PUSH/SELECT to select GROUP MMSI, then press PUSH/SELECT to select it.

2.To enter the first digit of the group MMSI, rotate PUSH/SELECT until the digit appears, then press PUSH/SELECT. The digit you entered appears and the flashing cursor moves to the next position.

3.Repeat Step 2 for each of the group MMSI's digits. When you have entered each of the group MMSI's digits, a confirmation screen appears.

4.If the displayed group MMSI is correct, rotate PUSH/SELECT to select YES, then press PUSH/SELECT to confirm it.

Otherwise, If the displayed group MMSI is not correct, rotate PUSH/SELECT to select NO, then press PUSH/SELECT to confirm it. Then repeat Steps 2 and 3 to enter the correct group MMSI.

Setting Up a User MMSI

When you first turn on the radio, you must program a user MMSI. A user MMSI is 9 digits in length.

Important: If you have already set the user MMSI, do not change it unless you have received a new user MMSI. After you program a user MMSI for the first time, you can only change it once more. If you try to change the user MMSI a third time, the radio will not accept the change. To change the user MMSI again, you must return the radio to Uniden for reprogramming.

1.Press MENU. A screen appears containing options you can select to work with the radio's features.

2.Rotate PUSH/SELECT to select SETUP, then press PUSH/SELECT to select it.

3.Rotate PUSH/SELECT to select USER MMSI, then press PUSH/ SELECT to select it.

WHAM PAGE

SETUP 16 SYSTEM

[EXIT]

SCRAMBLE

GROUP MMSI 16 USER MMSI

[EXIT]

If a user MMSI has already been programmed, a screen similar to the following appears. Stop here.

If a user MMSI has already been programmed twice, a screen similar to the following appears. Stop here.

Otherwise, if a user MMSI has not been programmed, you see the following screen.

USER MMSI

685749638 16

USER MMSI

685749638 16 CAN’T CHANGE

OVER 2 TIMES

USER MMSI

16

0--------

 

4.To enter the first digit of the user MMSI, rotate PUSH/SELECT until the digit appears, then press PUSH/SELECT. The digit you entered appears on the display and the flashing cursor moves to the next position.

38

Using the Radio’s Menus

 

Page 38
Image 38
Uniden UM-525 manual Setting Up a Group Mmsi, Setting Up a User Mmsi