| Specifications |
General |
|
Channels |
|
Transmit | 56 |
Receive | 82 Marine/10 Weather |
Channel Display | LCD with orange backlight |
Dimensions (HWD) | 4.4 x 6.6 x 5.2 in.(110 x 165 x 131.2 mm) |
Weight | 45.88 oz (1.3 kg) |
Supply Voltage | 13.8V DC negative ground |
Standard Accessories | Mounting bracket and hardware, DC power cord, |
| microphone hanger, spare fuse, GPS external cable, hailer cable |
Antenna Impedance | 50 Ohm nominal |
Microphone | 2 kOhm condenser mic element with coiled cord |
Speaker | 1.82 in., Mylar cone 8 Ohm |
Operating Temperature | |
Shock and Vibration | Meets or exceeds EIA standards, RS152B and RS204C |
FCC Approvals | Type accepted under Part 80 of FCC Rules; |
| meets Great Lakes Agreement and party boat requirements |
Transmitter |
|
Power Output | 1 watt or 25 watts (selectable) |
Power Requirement (Output) |
|
1W | Not rated |
25W | 5.6A at 13.8V DC |
Modulation | FM ±5 kHz deviation (FCC designator F3E) |
Audio Distortion | Less than 8% with 3 kHz deviation with 1000 Hz modulating frequency |
Spurious Suppression | 25 dBm @ Hi, |
Output Power Stabilization | |
Frequency Range | 156 to 158 MHz |
Frequency Stability | ±5 ppm @ |
Receiver
Frequency Range | 156 to 163 MHz |
Sensitivity | 0.25 V for 12 dB SINAD |
Circuit | Dual Conversion Super Heterodyne PLL |
Squelch Sensitivity | 0.5 V Threshold |
Spurious Response | 65 dB |
Adjacent Channel Selectivity | 65 dB @ ±25 kHz |
Audio Output Power | 2.8 watts (10% Distortion) |
Power Requirement | 200 mA @ 13.8V DC squelched, 0.7A @ 13.8V DC at maximum audio output |
IF Frequencies | 1st 21.4 MHz, 2nd |
42 | Specifications |
|