Understanding Your Radio
About This Manual
The screen displays used in this manual are representations of what might appear when you use your radio. Since what you see depends on the frequencies for your area and the settings you select, you might notice some differences between what is in this manual and what appears on your radio's display. Buttons you press appear in BOLD type, icons that
appear on the display appear in display appears in italic type.
BOLD REVERSED
type, and text that appears on the
How The Radio’s Controls Appear in This Manual
To help navigate the radio's menus, the steps shown in this manual describe the displays you see and the keys you press or control you operate to get a desired result.
This example shows you how to use the radio's menu to program a user MMSI for the first time. It shows you the button to press (MENU) to view a series of choices, the control to use (PUSH/SELECT) to view and select more choices, and the correct options to select (SETUP and USER MMSI) as you rotate PUSH/SELECT. It also instructs you to press PUSH/ SELECT to select the options.
Important: If you have already set the user MMSI, DO NOT CHANGE IT unless you have received a new user MMSI. After you program a user MMSI for the first time, you can only change it once more. If you try to change the user MMSI a third time, the radio will not accept the change. To change the user MMSI again, you must return the radio to Uniden for reprogramming.
1.Press MENU. A screen appears containing options you can select to work with the radio's features.
2.Rotate PUSH/SELECT to select SETUP, then press PUSH/SELECT to select it.
3.Rotate PUSH/SELECT to select USER MMSI, then press PUSH/ SELECT to select it.
If a user MMSI has already been programmed, a screen similar to the following appears. Stop here.
WHAM PAGE
SETUP 16 SYSTEM
[EXIT]
SCRAMBLE
GROUP MMSI 16 
USER MMSI
[EXIT]
USER MMSI
685749638 16
If a user MMSI has already been programmed twice, a screen similar to the following appears. Stop here.
USER MMSI
685749638 16 CAN’T CHANGE
OVER 2 TIMES
Otherwise, if a user MMSI has not been programmed, you see the | USER MMSI | 16 | |
following screen. | |||
| |||
4. To enter the first digit of the user MMSI, rotate PUSH/SELECT until |
|
| |
|
| ||
the digit appears, then press PUSH/SELECT. The digit you entered |
|
|
appears on the display and the flashing cursor moves to the next position.
Understanding Your Radio | 9 |
|
