Uniden UM380 owner manual Weather mode, Scan mode with both Weather Alert and Triple/Dual Watch

CHANNEL UP

To cancel weather mode and return to the previous marine channel, press the WX-MEM button again.

Weather mode can filter out alerts that do not affect your location if the location code (FIPS code) of the alert is entered in your radio (see page 15). If you have no FIPS codes programmed into your radio, the radio will notify you of all alerts in any area.

Scan mode with both Weather Alert and Triple/Dual Watch

You can activate Weather Alert Watch and Triple/Dual Watch at the same time. The radio performs both checks at their scheduled time.

Weather mode

Memory Channel Scan

08 10 11 1213 14 15 17 20 24 25

Triple Watch:			WX Alert : Every 7
Every 2 seconds,			seconds, the radio
the radio checks			checks the last-used	wx
channels 9 & 16			weather channel,
then goes on to	09	16	then scans the next
the next channel.			channel.

In cooperation with the FCC, NOAA also uses the weather channels to alert you of other hazards besides weather (child abduction alerts, nuclear, biological, etc.). In weather mode, the radio monitors one of the ten NOAA weather channels. If any type of alert is received for your area, the radio sounds an alert tone and displays the type of alert. In weather mode, the display shows the following:

Weather mode is on

Flashing: An alert has been issued Steady: Weather Alert Watch is on

Weather Band 09

Alert

Hurricane Warning

Current channel number

Type of alert

(If the text is too long, it scrolls.)

Using the radio in weather mode

xx You cannot transmit while in weather mode.

xx To enter weather mode, press WX-MEM. xx

xx To turn off the radio’s alert tone, press any button. xx

Weather mode with Weather Alert Watch

Because weather mode already monitors the weather channels, you don’t need Weather Alert Watch to check the weather channel every seven seconds. If you activate Weather Alert Watch while operating in weather mode, it operates as a type of “sleep mode”: the radio stays on the weather channel and mutes the speaker. If an alert is detected for your area, the radio sounds an alert tone and turns the speaker back on. This mode is very useful when you are anchoring for the night but want to stay informed of any hazards in your area.

To turn Weather Alert Watch on or off, press and hold CALL-MENUwhile the radio is idle.

Select Setup and then WX Alert Mode. Use and CHANNEL DOWN to choose WX Alert Mode setting ON or Off.

English 11

UM380_20101221.indd 11

4/13/2011 11:25:09 AM