Uniden UM380 owner manual Setup

	Timeframe		Is GPS	Display	Alert			Condition (Notes)
		Connected?
At 4 hour mark			Yes	Input Position		Yes	Error * (continuous
after receiving							display)
valid GPS data			None	Input Position	None		Normal (continuous
							display)
Over 23.5 hours			Yes	Input Position	None		Error * (Lost GPS data;
after receiving							continuous display)
valid GPS data
			None	Input Position	None		Normal (Lost GPS data;
							continuous display)

*If the radio displays an error condition, the radio cannot receive valid GPS data; check the GPS

##NOTE: Be certain any manually-entered position is correct. If you enter the wrong position and then make a DSC distress call, you will be telling the arrows to adjust each of the values in turn.

Press and hold -

Setup

Use the up and down arrows to adjust each of the values

	in turn.
GPS Setup
	Position Set

---o		--.- KT 16
--/--		11:22U
35o		0.610 N
	4
139o	46. 564 E

Back[CLR] Forward[ENT]

1.Display the normal menu and choose the Setup sub-menu.

2.Select GPS Setup and then choose Position Set.

3.The GPS manual input screen displays; the fields to be entered blink. The cursor highlights the hour. Use CHANNEL UP and CHANNEL DOWN to set the displayed hours to match coordinated universal time (UTC, also call Greenwich Mean Time and Zulu Time). When the display matches UTC time, press ENT-1W/25W. If you make a mistake while entering a digit, press CLR-SCANto erase the wrong number and moved the cursor to the left digit.

4.The cursor moves to highlight the minutes. Use CHANNEL UP and CHANNEL DOWN to adjust the minutes and press ENT-1W/25W.

5.The cursor moves to highlight the degrees latitude. As you update each value, the cursor moves to the next value in turn. At each number, use CHANNEL UP and CHANNEL DOWN to adjust the number and press ENT-1W/25W.

When you have entered the last value, the radio returns to the GPS Setup menu.

English 17

UM380_20101221.indd 17

4/13/2011 11:25:11 AM