[ 19 ]
Setting the Dial Mode (Australia only)
1) Enter the Global Setup menu, and then the Dial
Mode submenu (see “Entering the Menu” on page
13).
2) Press /vol/ or /vol/ to change the
select, Tone or Pulse (the initial setting is Tone).
3) Press . You will hear a confirmation tone.
Copy Phonebook
1) Enter the Global Setup menu, and then the Copy
Phonebook submenu (see “Entering the Menu” on
page 13).
2) Press /vol/ or /vol/ to choose One
Memory or All Memory, and then press .
If you choose All Memory, go to step 4.
3) Press /vol/ or /vol/ , or the number keypad (2-9 and 0) to select the
phonebook location you want to export, and then press .
4) Press /vol/ or /vol/ to select the handset to which you want transfer
the phonebook locations, and then press .
If you choose All Memory in the step 2, Are you sure? appears.
Press /vol/ or /vol/ to select Yes, and then press .
The phonebook locations will be transferred to the handset. On the receiving
handset, Receiving and the handset name appear. When the transfer complete,
Done! appears on the handset.
• If you receive a call
the transfer will
be canceled.
• If an error occurs,
the phonebook
locations
transferred before
the error were
stored in the
receiving handset.
Unavailable
appears on
the display.
• When the memory
of the receiving
handset is full, Not
enough memory
in Receiving
Handset appears.
You cannot transfer
the phonebook
location.
Copy PhonebookOne MemoryAll Memory :xxx
Dial ModeTonePulse