•The time stamp will not be heard until you have set
the time.
•When the answering system is full,
FL appears on the base. You should delete some messages so that the system can record new messages. (Refer to “Deleting a message” on page 50.)
[ 49 ]
Using your Answering System
The message counter displays the number of messages stored in memory. If the display flashes, then there are new messages waiting for you. The answering system plays your new messages first. After you play all your new messages, you can then play your old messages.
Playing your messages
1)When the phone is in standby mode, press 
play/stop.
The system announces the number of new and old messages while the message counter displays only the number of new messages. The time and day that each message was received is announced after the message is played. The message counter will then display the number of current stored messages.
2)When all new messages have been played, you hear a confirmation tone and the system announces “End of messages.” The system returns to standby. After you have reviewed
your new messages, you can play your old messages by pressing 
play/stop again. Once you have listened to a new message, it then becomes an old message. The old mes- sages will be played in the order in which they were received.
Repeating a message
1)Press 
play/stop to review your messages. The number of stored messages is announced.
2)To repeat the current message, press 
repeat/SELECT after a few seconds of begin- ning the message. To quickly scroll backwards through a message, press and hold 
repeat/SELECT.
To repeat the previous message, press 
repeat/SELECT within a few seconds (about 4 seconds during remote operation) after a message begins playing. If you have several mes-
sages, press 
repeat/SELECT repeatedly until you return to the message you want to replay. If the current message is the first new message, the system plays back from the begin- ning of the current message (it does not go back into the old message group).
3)Press 
play/stop at any time to stop reviewing messages and return to standby. The message counter shows the number of messages stored in memory.
