Uniden WDECT3355, WDECT3355 Additional Information, Changing the Digital Security Code

Changing the Digital Security Code

The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code.

To change the digital security code:

1.Perform the “System Reset” menu options (“De-register the Handset” and “Replacing the Base Setting”) for all the handsets you have (see page 20).

2.To register all the handsets do the following steps:

1)Place a handset, one at a time in the base.

2)Registration starts automatically.

While registering Handset Registering appears in the display.

3)When the registration is complete, Registration Complete appears in the display.

4)Repeat steps 1 - 3 for another handsets.

If the registration fails, Registration Failed appears in the display. Try the steps above again.

ADDITIONAL INFORMATION

[ 60 ]