Uniden WDECT3355, WDECT3355 System Reset, De-register the Handset, Replacing the Base Setting

Replace base? Yes

No

System Reset

De-register the Handset

1)	Enter the System Reset menu, and then the
							Which Handset?
	Deregister HS submenu (see “Entering the Menu”
	on page 13).						Handset	#1
2)	Press	/vol/		or	/vol/	to select the handset	Handset	#2
	ID to be de-registered from the list, and then press
			. Deregister HS? appears.
							Deregister	HS?
3)	Press	/vol/		or	/vol/	to select Yes.
4)	Press			. You will hear a confirmation tone.			Yes
	When de-registration is complete, Deregistration						No
	Complete appears.
5)	After de-registering the handset, move to “Replacing the Base Setting” below.

Replacing the Base Setting

1) Enter the System Reset menu, and then the Replacing Base submenu (see “Entering the Menu” on page 13). Replace base? appears.

2) Press /vol/ or /vol/ to select Yes.

3)Press . You will hear a confirmation tone. The base information will be deleted.

When replacing the base is complete, Place handset on main base to register appears, register the handset to the new base (see page 56).

Make sure to perform the Replacing Base after de-register the handset.

[ 20 ]