Using the Caller ID Message List
Calling a party from the Caller ID list
From Standby mode
1)When the phone is in standby mode, view the Caller ID message (see “Viewing the Caller ID List” on page 38).
2)Press 
or 
speaker. The displayed phone number dials automatically.
From Talk mode
1) Press 
or 
speaker.
21/12 11:20AM Jane Smith 0295979035
• You cannot make a |
call from the Caller ID |
list if your phone is |
connected to a private |
branch exchange (PBX). |
• If a call comes in via a |
telephone system that |
does not offer Caller ID |
service, no information |
is stored. |
2)View the Caller ID message you want to dial (see “Viewing the Caller ID List” on page 38).
3)Press 
. The displayed phone number will be dialed.
Adding Zero to Caller ID message (New Zealand only)
While you review Caller ID information while the Insert Zero option is set to On, “0” is inserted. Refer to page 18 “Setting Insert Zero (New Zealand only)” to set the Insert Zero option to On or Off. New Zealand Telecom customers should leave Insert Zero to On. Other New Zealand companies may require Insert Zero set to Off.
Storing Caller ID messages in the Phonebook
Messages shown in the Caller ID list can be stored in the phonebook. The phone number and name of the party on the Caller ID list can be stored in memory.
1)When the phone is in standby mode, view the Caller ID message to be stored.
Then press 
. Store/Edit Name appears.
2)To complete the setting, follow the steps
• If the Caller ID message |
was received as a |
private/unknown |
number, or the message |
does not have the |
number, you cannot |
store the message in |
the Phonebook. If it |
was received as private/ |
unknown name, the |
message will be stored |
as <No Name>. |
• Even if the 100 memory |
locations are full, the |
message will be stored |
in the Phonebook. |
However, the message |
will be erased from the |
Caller ID list. |
[ 40 ]
