Storing Phone Numbers and Names
Memory Dialing allows you to dial a number using just a few key presses. Your cordless telephone stores up to 10 names/numbers in the handset.
1)Press and hold mem, “Memory Store” is displayed.
2)Press the vol/+ or vol/- key, or enter a number (0 - 9) to select the memory location where you would like to store the number.
3)Press select. The following screen appears and a cursor flashes indicating that the display is ready for the name to be entered.
Memory Store
1
2
Store Name
• In memory dialing |
operation, you must |
press a key within 30 |
seconds or the phone |
will return to the |
standby mode. If you |
return the handset to |
the base, the phone |
will return to the |
If this screen appears, the selected memory location is already stored. Then you must either edit the entry in this location, delete the entry in this location, or select
“Go Back” to choose another location.
4)To enter a name (up to 14 characters), use the number keys.
Edit Memory 1
Delete Memory 1
Go Back
standby mode also. |
• You have 30 seconds |
after pressing mem |
to enter the number |
you wish to store. |
Otherwise, an error |
•See the “Steps for Entering Names and Special Characters”. (See page 25.)
•Use the #/s or */tone/t key to move the cursor to the desired location.
•Use delete/ch to delete characters as needed.
•Press and hold delete/ch to delete all the characters.
•If a name is not required, go to step 5.
tone will sound. |
MEMORY DIALING
www.uniden.com | M E M O R Y D I A L I N G [ 23 ] |
