•The base is not water resistant. Also wipe off a dirty or wet handset before placing in the base.
•Use only the supplied
AC adapter.
•Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.
C. Connect the base unit
Route the cord.
1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.
2) Set the base on a desk or tabletop, and place the handset in the base unit.
3)Make sure that the charge/in use LED illuminates.
If the LED does not illuminate, check to see that the AC adapter is plugged in and that the handset is sitting correctly in the base.
•Connect the AC adapter to a continuous power supply.
•Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.
•After activating the handset, charge your handset at least
4) Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and to a telephone outlet.
If your telephone outlet isn't modular, contact your telephone company
for assistance.
Modular
[ 12 ] G E T T I N G S TA R T E D | www.uniden.com |