If the rubber seal appears warn, nicked, or dried out, replacement seals are available through the Uniden Parts Department. If you have questions regarding installation of battery pack and/or rubber seal, please call our Customer Hotline at 1-800-297-1023.

Battery use time (per charge)

From fully charged (15-20 hours charge time)

Up to seven hours continuous use during talk mode

Up to fourteen days when the handset is in the standby mode

Low battery alert

When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, “Low Battery” appears on the LCD and none of the keys will operate.

If the phone is in use, “Low Battery” flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging.

The last number dialed in the redial memory, as well as, the names and the numbers stored in the memory locations are retained for up to 30 minutes while you replace the battery pack.

Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance, be sure to return the handset to the base unit after a telephone call.

Talk Mode -

The handset is off the base and talk/flash has been pressed enabling a dial tone.

Standby Mode -

The handset is not in use, off the base and talk/flash has not been pressed. A dial tone is not present.

GETTING STARTED

www.uniden.com

G E T T I N G S TA R T E D [ 11 ]

Page 11
Image 11
Uniden WXI377 manual Battery use time per charge, Low battery alert, Talk Mode, Standby Mode