Low Battery Indicator
When the Battery Pack in the Handset is very low and needs to be charged, the
TALK/BATT LOW LED flashes.
If the TALK/BATT LOW LED begins flashing, the phone is programmed to eliminate its functions to save power. The table below describes what to do to return your phone to normal operation.
During a Call | In Standby Mode |
Only the T button | None of the buttons will |
operates. | operate. |
The Handset beeps and | The Handset TALK/BATT |
the TALK/BATT LOW LED | LOW LED flashes once |
flashes once every 3 | every 3 seconds. |
seconds. |
|
Complete your call as | You will not be able to |
quickly as possible. | make a call. |
Return the Handset to | Return the Handset to |
the Base Unit for | the Base Unit for |
charging. | charging. |
Note: Allow 15 to 20 hours without any interruption for the Handset to fully recharge.
Setting the Pulse/Tone Switch
Be sure the 
switch is in the tone 
position. | |
|
Note: Most phone systems are Tone dialing. Check with your local phone company if you are not sure whether your system is Tone or Pulse dialing.
Setting the Handset Listening Volume
You can choose two different volume settings when using the Handset during a call. When the Handset is first used, the volume will be at its normal setting. However, you can change to a higher volume by pressing Vduring a call. To return to the normal volume, press Vagain.
Setting Handset Ringer Volume
You can choose between two different ringer styles, each with a high and low volume. To select the style and volume you like best, press the G key until you hear the desired setting.
Note: Just remember to select your Hanset ringer style and volume when you’re not using the phone for a call.
Setting the Base Ringer Volume (XCA555 Only)
To adjust the Base Unit |
|
ringer volume, set the | ring vol |
ring | |
| |
the desired setting. |
|
16 | XCA550/55 |
