Automatic Digital Code Security
To avoid unauthorized calls on your phone, a Digital Code feature was added to the XCA550/55. This Digital Code is shared only between the Handset and Base Unit. The Code is set automatically when you first use the phone.
To change the Digital Code, be sure the Handset is on the Base, then:
1. Remove the
Handset from the
Base Unit.
2.Press the page/find button on the Base Unit.
3. Place the Handset back on the Base Unit while it’s still beeping.
4.When the beeping stops, briefly remove the Handset again, and then
return it to the Base Unit.
Note: The status LED will blink, indicating the Digital Security Code is set to one of the more than 65,000 codes.
If the Base Unit loses power while the Handset is off the Base, the Digital Code may be erased. When this happens, the Handset will not function. To reestablish the security link between your Handset and Base units:
1.Restore power to the Base Unit.
2.Place the Handset
back on the Base Unit.
3.The status LED will blink, indicating the Digital Security
Code is set again.
XCA550/55 | 17 |
