Uniden XCA750 manual Remote Operation, Recording a Telephone Conversation, Setting Your PIN Code

Recording a Telephone Conversation*

WARNING

Use of this device for monitoring telephone conversations is not permissible under New Zealand law, unless:-

(a) At feast one party of the conversation is aware of its use,

or,

(b) Use is authorised for Police or Security Service applications.

Use of this information shall follow the ,principles. detailed in the Privacy Act 1993.

To record a conversation during a call:

1.Press m.

The talk/batt low LED changes from red to green, and the telephone sounds warning beeps to /et the other party know that the call is being recorded.

Note: You can record a conversation for up to 10 minutes continuously

2.To stop recording, press w again.

The talk/batt low LED changes from green back to red.

Note: A recorded call is like a message - if you use all of the available record time, the Recording function cancels automatically,

*Note: This feature is NOT available on Australian version of XCA650 XCA 750.

Remote Operation

you can operate your XCA650/XCA750 while you’re away from home by calling from any touch-tone phone. When using this feature, remember these important guidelines.

lYou should change your Personal Identification Number (PIN) before using your Handset. When you first apply power, the code is set to 0000.

lThe dialing keys on a touch-tone phone work the same as the function keys on your phone’s Handset except you must press # before selecting a command.

lYou cannot change the Time and Day Stamp or your PIN code from a touch-tone phone.

Setting Your PIN Code

Using the Handset, you can set a personal four-digit code (0000 to 9999) for your PIN code. You must use your PIN code to access your Answering System from a touch-tone telephone.

1.Press m.

The talk/batt low LED lights green.

69 70