BaseOperation
1.Press. l
The speaker beeps, and the Time and Day Stamp is announced.
Setting Your Outgoing Message (OGM)
When you receive a call, the Answering System answers and automatically plays either a preset message or your personal Outgoing Message.
Preset Messages
The XCA650/XCA750 has two message programmed in its memory. If the RECTIME/ANN/4/1 switch is in either the four or one position, the first preset message below plays. Incoming messages are limited to four or one minute respectively. If the switch is set in the left posion. (i.e., the “Announce On/y” position) the second message below plays, and no incoming message are recorded.
. Hello. No one is available to take your call. Please leave a message after the tone.
lHello. No one is available to take your call.
Recording Your Personal OGM
HandsetOperation
1.Press w.
The talk/batt low LED lights green.
2.Press lb.
Note: You can leave up to a
Note: If the REC TIME/ANN/4/1 switch is in the “Announce Only” position, the Message Counter LED displays an A when the system is in Standby.
45
46