5.Use this chart to select the function you want.
Function Press
-
Troubleshooting
6.When you’ve finished, hang up to exit the system.
Your Answering System automatically returns to Standby.
Help Menu | 1 #0 1 |
If your XCA650/XCA750 integrated Telephone Answering Device is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact Uniden Customer Service for assistance.
Telephone Troubleshooting Chart
| Problem | Suggestion |
|
|
|
| Charge light won’t come on when Handset | l Make sure AC Adapter is plugged into the |
| is placed in Base Unit. | Base Unit and wall outlet. |
|
| l Make sure Handset is properly seated in |
|
| Base Unit. |
|
| l Make sure that the char ing contacts on |
|
| the Handset and Base unit are clean. |
| Audio sounds weak and/or scratchy. | l Make sure that the Base Unit antenna is |
|
| fully extended and vertical. |
|
| l Move the Handset and/or Base Unit to |
|
| different locations and try again. |
|
| l Press chan to select another channel. |
| Can’t make or receive calls. | l Check both ends of the Base Unit |
l To remotely set your XCA650/XCA750 to activate the
(Australian Version ONLY)
1.From any remote phone, dial your phone number.
2.Allow your phone to ring 10 times.
3.After 10 rings, your X C A 6 5 0 will activate the answering machine facility.
4.Once activated, you will hear your OGM announcement.
5.
| telephone line cord. |
| l Make sure the AC Adapter is plugged into |
| the Base Unit and wall outlet. |
| l Disconnect the AC Adapter for a few |
| minutes, and then reconnect it. |
Handset doesn’t rlng or receive a page. | l |
| weak. Charge the battery on the Base |
| Unit for |
| l Extend the Base Unit antennavertically |
| l The Handset may be too far away from |
| the Base Unit. |
| l Place the Base Unit away from noise |
| sources. |
| l The Digital Securit Code may be erased. |
| Set the Digital CJe. |
Base Unit doesn’t ring. | l Set the Base Unit Ringer switch to LO or |
| HI. |
73
74
