Message Full Indication
The XCA650/XCA750 has a maximum record time of 20 minutes or up to 40 incoming message. When the memory is full, the Answering System will not record incoming calls. To return the system to normal operation, follow these steps.
1.When the memory is full, the phone will ring 10 times before the announcement “No remaining time for incoming messages” plays.
2.You must review your messages and then delete some or all of the stored messages.
Voice-Guided Help Menu
If you are unsure of the commands available while using the Handset, you can use the
1.Press a.
The talk/batt low LED lights green.
2.Press ?.
A tone sounds, and the Voice-Guided Menu begins to play.
3.There are two ways to exit
the Help Menu - press m anytime during the review or listen to all the options and wait for the system to automatically exit.
4.When you exit Help, you will hear a short tone every three seconds, indicating that the system IS in the Command Waiting Mode. Press another command, or press w to return to Standby.
Note: You have 20 seconds to enter another command while in the Command Waiting Mode before the system automatically returns to Standby.
When you return to Standby, the talk/batt low LED goes
Off.
65 | 66 |
