Using the Stylus
CAUTION: Never use anything other than the PA9627s stylus on the screen. Using another object as a stylus could cause permanent damage.
1.Hold the stylus as you would a pencil.
2.To make a choice from a menu, lightly tap the tip of the stylus on that choice.
3.To write data into a field on a form, use the stylus to print the letters or numbers. Use very light pressure.
PCMCIA Pulling Tags
Pulling Tags simplify the removal of PCMCIA cards from the PA962. Before inserting a PCMCIA card, remove one of the three Pulling Tags from the Pulling Tag sheet and adhere it to both sides of the PCMCIA card, leaving a short (approx. 89) tab. To remove the PCMCIA card, simply pull outward on this tab.
If a PCMCIA card is inserted into the PA962 without previously attaching a Pulling Tag, the card can be removed by affixing a length of adhesive tape to the surface of the card and pulling the card out by pulling outward on the piece of tape.
Insert CF card to PA962
Front side of PCMCIA card
Find the CF drawer from PA962 package, insert CF card to the CF drawer. Then insert the CF drawer to the PA962 and place the CF slot door.
1. | 2. | 3 |
Your CF card. | CF drawer |
|
10 | Unitech PA962 |
