Unitech manual First Steps with the Unitech PA962, Installing the Battery Pack

First Steps with the Unitech PA962

There are three ways to provide power to the PA962:

=Rechargeable Lithium-Ion battery pack

=RS232/Charging cable or USB/Charging cable

=Docking Station

NOTE: Data you enter may not be properly stored until the built-in backup battery has been adequately charged. Please be remided to turn on the back up battery before you charge the terminal.

Installing the Battery Pack

1.

Remove the battery compartment door (located on the lower back side of the unit).

2.

Position the battery pack with the label side towards you, and the battery pack strap towards the bottom of the unit. Insert and fully seat the battery pack, making sure the shape of the battery pack fits the shape of the battery compartment.

8 Unitech PA962