There are four user-definable function keys, F1 to F4. Under Ready Mode, pressing one of them will automatically perform a series of keypad inputs. The default settings for the function keys are:

F1

[MENU]111

F2

[MENU]22

F3

[MENU]23

F4

[MENU]26

For example, pressing F1 under the Ready Mode, will perform the same as if you were to press the four keys [MENU] 1 1 1 sequentially. In this case, EzJob will start and will accept data input.

Select 1 to 4 to select the corresponding function key and enter the keystroke sequence. For example, typing 1 will select function key F1. Then enter the desired keystrokes.

<FNKY MENU >

Define F1

? 111.

Note: Any pressed key will become part of the shortcut input except F1 through F4 because those shortcut keys cannot be nested. During the shortcut input, keys F1 through F4 are only used to confirm or abort the shortcut settings and/or exit.

F1 Reset settings to Factory Default

F2 Clear the fields for new input

F3 Abort any changes and Exit

F4 Save settings and Exit

21

Page 22
Image 22
Unitech PT-500 manual Define F1