Instructions | Additional Information |
4Press POWER.
5Press the UP or DOWN ARROW repeatedly until the equipment turns off.
6Press POUND (#).
7Turn the equipment back on and try some other buttons to make sure they work.
8If necessary, repeat this procedure until you’ve tried all the codes.
9Once you find a code that works, consider using Limited Mode.
This puts your remote in the scan mode.
As you press the UP or DOWN ARROW, the remote tries each code in the memory to see if it can turn off your equipment.
When the equipment turns off, you have found a code that might work.
Note: The mode button for the equipment flashes rapidly eight times when you’ve scanned all the codes for that equipment.
The mode button flashes three times if you have entered the code correctly. This stores the code you found.
Press POWER to turn the equipment back on. Try some other buttons to make sure they work. Sometimes POWER works when other buttons don’t.
You may need to repeat the scan to find the best code for your equipment.
See page
6
