Instructions | Additional Information |
9Turn the equipment back on and try some other buttons to make sure they work. If the code works for other buttons, stop here.
Note: If you have programmed your remote in Limited Mode, only the MUTE and VOLUME buttons work.
10If the code doesn’t work, repeat steps 3 through 9 with another equipment code from the tables.
11If you can’t find a code that works, try Scanning for Equipment Codes that follows.
For example, sometimes POWER works when other buttons don’t.
Try every code listed for your brand until one works for your equipment.
SCANNING FOR EQUIPMENT CODES
Instructions | Additional Information |
|
|
1 Turn the equipment on. | Use the equipment’s front panel |
| buttons or its remote control. |
2Press and hold the mode button until all the other mode buttons light up, and then let go of the button. The mode button flashes.
For example, hold TV for a TV until all of the other mode buttons light. When you let go, TV flashes.
3For AUX mode only. Press 0 for a second TV, or 1 for a second VCR, or 2 for a tuner, or amplifier. Then press the STAR (*) button.
This step is for programming which kind of equipment that should be programmed in AUX mode. If you’re not programming in AUX mode, skip to step 4.
5
