Vermont Casting 1945 Stove Heat Shields, Defiant Woodburning Stove, 30001693

Models: 1945

1 40
Download 40 pages 14.3 Kb
Page 15
Image 15
Stove Heat Shields

48"48"

(1220mm) Manual backgroundManual background (1220mm)

48"

48"

(1220mm)

(1220mm)

 

ST497

Fig. 16 Parallel installation, vertical chimney connector, two wall shields. Reduced clearances for both rear and side walls. Wall shields may meet at corner if desired. Shielding for con- nector is centered behind connector.

48" (1220mm) Manual background

48"

48"

(1220mm)

(1220mm)

ST498

Fig. 17 Parallel installation with rear wall pass-through, two wall shields. Reduced clearances to both rear and side walls. Wall shields may meet at corner if desired. Wall pass-through must comply with codes.

Refer to “Special Installations.”

Defiant Woodburning Stove

48"

48"

(1220mm)

(1220mm)

48"

48"

(1220mm)

(1220mm)

 

ST499

Fig. 18 Corner installation, vertical chimney connector, two wall shields. Reduced side clearances. Wall shield MUST meet at corner.

Stove Heat Shields

The Vermont Castings Defiant Rear Heat Shield, shown below, is one way to reduce the clearance to the rear wall. The rear heat shield can be installed in any set- ting. However, since the chimney connector also radi- ates heat toward the wall, you must use a chimney con- nector shield whenever you use the rear heat shield.

Clearance reductions with the rear heat shield apply only to the wall to the rear in parallel installations. Nei- ther the side clearance requirement nor the clearance requirement in corner installations may be reduced.

Flue Collar Heat

Shield

Rear Heat

Shield

Bend

Spacers

Truss Head

Phillips Screws

KT287

Fig. 19 Defiant rear heat shield with flue collar heat shield for top exit configuration.

30001693

15

Page 15
Image 15
Vermont Casting 1945 installation instructions Stove Heat Shields, Defiant Woodburning Stove, 30001693