OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

GENERAL GLASS INFORMATION

Only glass approved for use in with this product may be used for replacement.

1.The use of substitute glass will void all product warranties.

2.Care must be taken to avoid breakage of the glass.

Under no circumstances should this fireplace be operated without the front glass or with a broken glass. Replacement of the glass (with gasket) as supplied by the manufacturer should be done by a licenced qualified service person.

LOUVRE REMOVAL

D232

To remove louvres first remove the two (2) screws (Fig. 31) fastening the louvre assembly to the fireplace. Lift the louvre assembly straight out sliding the back guides out of the fireplace body. (To reinstall, reverse).

Front View

Screws

Fig. 31

TRIM REMOVAL

D232

1.Remove the two (2) outer 3/8" nuts holding the frame window brass trim in place. (Fig. 32)

2.Remove the frame window brass trim by moving it straight forward.

GLASS REMOVAL

D232

1 . Remove frame window brass trim (See Trim Removal section)

2.Remove remaining bottom 3/8" nut at the bottom of the frame window.

3.Remove 3/8" nut from each side of the frame window (Fig. 32).

4.Remove frame window by pulling it forward and up.

 

GLASS

 

FRAME

OUTER NUTS

DRAWING 2

 

DRAWING 1

 

Side Nuts

 

BOTTOM NUT

Fig. 32

- 18 -

Page 18
Image 18
Vermont Casting D232 Operating Instructions, General Glass Information, Louvre Removal, Trim Removal, Glass Removal