Vermont Casting IRHEDV32 installation instructions A5 Cast Trim Options, Imt

		A5) CAST TRIM OPTIONS
Cast Surround And Flat Face
	HECBL	Cast Surround Black
	HECBLUE	Cast Surround Blue
	HECCG	Cast Surround Charcoal Grey
	HECGR	Cast Surround Green
	CSSP	Polished Brass Small Trim for Cast Surround
	CSLP	Polished Brass Large Trim for Cast Surround (to be used with CSSP)

A6) FREESTANDING KITS

Convert Insert Into a Freestanding Stove

Note: 1) Requires Bay Window Face Kit

2)Vent starter kit FSHEDVSK must be installed to use any of the freestanding shells.

FSNVCSKB	Classic Black Freestanding Cast Shell
FSNVCSKM	Midnight Black Enamel Freestanding Cast Shell
FSNVCSKG	Green Enamel Freestanding Cast Shell
	A7) RISER KITS

1.Install the unit according to Homeowner’s Manual.

2.Install the trim according to Installation Instructions.

3.Remove the two (2) screws at the bottom of the trim.

4.Install the riser at the bottom of the trim (Fig. 58).

5.Fasten the trim with the same two (2) screws removed on step 3.

Note: The riser kit should only be used with the RHEBSL & RHEBXL trim.

Riser Trim Dimensions

	Length - A	Height - B	Depth - C
RHER1-Riser 1”	42.0” (1067mm)	1.0” (25.6mm)	2.55” (64.8mm)
RHER2-Riser 2”	42.0” (1067mm)	2.0” (50.9mm)	2.58” (65.6mm)
RHER5-Riser 5”	42.0” (1067mm)	5.0” (127.9mm)	2.58” (65.6mm)

Fig. 41

A8) ARCH DOOR KITS

HEADKA - Antique Brass Arch Door

HEADKP - Polished Brass Arch Door

B) REMOTE CONTROL

Only for units with RN/RP valve. IMT - Wall mounted thermostat control,

MRC1 - On/Off Button Remote Control

MRC2 - Temperature Control Remote

MRC3 - Temperature Control with digital display and 24 hour programmable clock.

10003929 26