Vermont Casting NVBC42, NVBR36 warranty Operating Instructions

NVB Series B-Vent Gas Fireplace

Operating Instructions

Glass Information

Only glass approved for use in Majestic Fireplaces products may be used for re- placement.

•Glass doors are optional. The appliance may be operated safely without glass doors.

•The use of any non-approved replacement glass will void all product warranties.

•Bi-fold glass doors MUST BE completely open or closed while the appliance is in operation.

•Care must be taken to avoid breakage of the glass.

•Under no circumstances should this appliance be operated with broken glass. Replacement of the glass as supplied by the manufacturer should be completed by a licensed qualified service person.

•Replacement glass is available through your Majestic Fireplaces dealer and should only be installed by a licensed qualified service person.

Glass Cleaning

It will be necessary to clean the glass periodically. During start-up, condensation, which is normal, forms on the inside of the glass and causes lint, dust and other airborne particles to cling to the glass surface. Also, initial paint curing may deposit a slight film on the glass. It is therefore recommended that the glass be cleaned two or three times with a non-ammonia household cleaner and warm water (we recommend gas fireplace glass cleaner). After that the glass should be cleaned two or three times during each heating season depending on the circumstances present.

Clean glass after first two weeks of operation.

Log Installation

1.Open glass door (if installed).

2.Remove logs from the packaging.

As with all plastic, these bags are not toys and should always be kept away from children and infants.

3.Place left rear log on rear log support. Ensure that log is firmly positioned and there is no side-to-side movement. (Figs. 15 & 16)

4.Carefully place Ember Left and Right Logs between grate and burner. (Figs. 15 & 16)

5.Place the front of right rear log on the burner and the back of the log on the rear log support.

6.Place the top logs onto the locator notch- es. Ensure the logs are secure. (Fig. 15 & 16)

Ember Material Placement

Separate the ember material into small pieces, roughly 1/2" in diameter and place on bracket over front burner tube. Do not pack down; leave in loose, fluffy condition for most realistic ember effect. (Fig. 15 & 16)

Lava Rock

The lava rock provided with this fireplace must be placed on the firebox base on either side of the burner assembly.

12

	Right Cross
	Log
Left
Cross
Log
		Right Rear
		Log
		Embers
Left Rear
Log
		Ember
		Right
		Log
		(Short)
Lava Rock
	Ember Left	Lava Rock
	Log (Long)
		LG149
Fig. 15	NVB36 log placement.
		7412950