Operating Instructions

NVC Series B-Vent

Glass Information

Only glass approved by CFM Corporation should be used on this ﬁreplace.

•The use of any non-approved replacement glass will void all product warranties.

•Care must be taken to avoid breakage of the glass.

•Do not operate appliance with glass front removed, cracked or broken.

•Replacement glass (complete with gasket) is available through your CFM Corporation dealer and should only be installed by a licensed qualiﬁed service person.

Louvre Removal

Lower
Clamps
	Window Frame
Window	Assembly
Window
Frame As-
sembly	Pull Clamp
Push	Hook
Clamp

To remove the lou- vre top assembly, lift louvre up and then out. (Fig. 12) The louvre bottom assembly is hinged at the bottom edge and swings down.

Louvre

1.Top

Assembly

Glass Panel

FP383

Handle	FP1191

Fig. 11 Window frame assembly removal.

Glass Cleaning

It is necessary to clean the glass periodically. Dur- ing start-up, condensation, which is normal, forms on the inside of the glass and causes lint, dust and other airborne particles to cling to the glass surface. Also initial paint curing may deposit a slight ﬁlm on the glass.

Fig. 10 Louvre install and removal.

Window Frame Assembly Removal

1.Turn gas off.

2.Let the unit cool if it has been operating.

3.Remove louvre top assembly. (Refer to Louvre Re- moval section.)

4.Open louvre bottom assembly.

5.Release the two clamps at the bottom of the window frame by pulling down on the clamp handles.

6.Lift off the window frame assembly as shown. (Fig. 11)

7.To reinstall window frame assembly, follow the above procedure in reverse.

It is therefore recommended the glass be cleaned two or three times with a non-ammonia household cleaner and warm water (gas ﬁreplace glass cleaner is recom- mended). After initial use glass should be cleaned two or three times during heating season.

Clean glass after ﬁrst two weeks of opera- tion.

Do not clean glass when hot.

Do not use abrasive cleaners.

Do not strike or slam the glass.

Log Installation

1. Remove window frame assembly. (Refer to Page xx)

2. Remove logs from the packaging.

As with all plastic, these bags are not toys and should always be kept away from chil- dren and infants.

3.Place rear log on back bracket. Ensure that log is ﬁrmly positioned and there is no side-to-side move- ment.

4.Place the front log on top of the burner, use bottom holes to locate the logs on top of the studs.

5.Place the front right log on top of the burner, Use bottom holes to locate the logs on top of the studs.

20000194

NVC39, NVC36, NVC43 specifications

Vermont Castings is known for its commitment to quality and craftsmanship, and its NVC series of gas stoves, including the NVC39, NVC36, and NVC43, exemplify this tradition. These models provide both warmth and aesthetic appeal, making them popular choices for homeowners seeking a blend of efficiency and style in their heating solutions.

The NVC39 is designed for larger spaces, boasting a heating capacity that can warm up to 2,000 square feet, making it suitable for open-concept living areas or larger rooms. It features a generous viewing area, allowing residents to enjoy the mesmerizing flames while creating an inviting atmosphere. With an impressive efficiency rating, the NVC39 ensures that fuel consumption is minimized, resulting in lower heating costs.

Moving to the NVC36, this model offers a slightly more compact design without compromising on power. It is an ideal choice for medium-sized rooms and comes equipped with the same high-efficiency rating as the NVC39. This model is particularly favored for its easy-to-use controls, allowing users to adjust the flame and heat output effortlessly. Its stunning cast iron construction not only provides durability but also enhances the classic aesthetic Vermont Castings is renowned for.

The NVC43 is the largest of the trio, making it perfect for those looking for a powerful heating solution for extensive spaces. With its capable output, it can effectively heat areas over 2,500 square feet. Like its counterparts, the NVC43 integrates modern technology with traditional design. It features an advanced ignition system that ensures reliable starting every time. Furthermore, it is designed with an oxygen depletion sensor, prioritizing safety by automatically turning off the unit if oxygen levels drop to unsafe levels.

All three models come with customizable options, allowing the user to personalize their stove with various finishes and styles. Add-on features like ceramic glass doors and optional blowers enhance their functionality and aesthetics. In addition, they incorporate a burn system that maximizes heat output while minimizing emissions, aligning with Vermont Castings' commitment to environmental stewardship.

Overall, the Vermont Castings NVC series combines advanced technology, character, and efficiency, providing homeowners with versatile options that meet both heating needs and design preferences. They are ideal for anyone seeking the practicality of modern heating with the beauty of classic craftsmanship.

Vermont Casting NVC43, NVC36, NVC39 warranty Operating Instructions

Models: NVC39 NVC36 NVC43